Muzzleloading Forum
 
HomeGalleryFAQSearchRegisterLog in

Share | 
 

 Stock Repair - How Difficult

View previous topic View next topic Go down 
AuthorMessage
rowdyjoe

avatar

Number of posts : 79
Age : 71
Location : Arlington, TX
Registration date : 2017-05-27

PostSubject: Stock Repair - How Difficult   May 28th 2017, 8:37 pm

How much does a defect like this affect the integrity of the stock/rifle and how difficult is it to repair?

Back to top Go down
View user profile
conner
Site Moderator &
Site Moderator &
avatar

Male Number of posts : 839
Age : 77
Location : Lehi Utah
Registration date : 2015-10-20

PostSubject: Re: Stock Repair - How Difficult   May 31st 2017, 8:14 pm

If the gun was mine I would try to glue it with a good epoxy and if feeling real daring try to pin through the crack from the top of the stock through the crack into the wood below the crack so nothing can move. The biggest issue is moisture, cold and hot weather could make that crack continue into the wrist, stop it before it grows.

_________________
Back to top Go down
View user profile http://grrwca..com/
FrontierGander
Forum
Forum
avatar

Male Number of posts : 14310
Age : 33
Location : Boncarbo,Colorado
Registration date : 2008-05-19

PostSubject: Re: Stock Repair - How Difficult   May 31st 2017, 8:20 pm

do like the old days, wrap it with rawride and sew it together and let it set up hard.
Back to top Go down
View user profile http://www.frontiermuzzleloading.com
conner
Site Moderator &
Site Moderator &
avatar

Male Number of posts : 839
Age : 77
Location : Lehi Utah
Registration date : 2015-10-20

PostSubject: Re: Stock Repair - How Difficult   May 31st 2017, 8:49 pm

@FrontierGander wrote:
do like the old days, wrap it with rawride and sew it together and let it set up hard.

I would try to glue it with a good epoxy and if feeling real daring try to pin through the crack from the top of the stock through the crack into the wood below the crack so nothing can move. The biggest issue is moisture, cold and hot weather could make that crack continue into the wrist, stop it before it grows. 

Then you can wrap it with rawhide. I have done repairs like you mentioned when trekking for a week at a time and you better hope it didn't rain or your back to square one.

_________________
Back to top Go down
View user profile http://grrwca..com/
rowdyjoe

avatar

Number of posts : 79
Age : 71
Location : Arlington, TX
Registration date : 2017-05-27

PostSubject: Re: Stock Repair - How Difficult   May 31st 2017, 10:13 pm

I've decided to pass on this one.  The seller wants more money for this broken rifle than a new one ....seriously. 

Are TC Hawkens so rare they bring higher prices than a new rifle?
Back to top Go down
View user profile
FrontierGander
Forum
Forum
avatar

Male Number of posts : 14310
Age : 33
Location : Boncarbo,Colorado
Registration date : 2008-05-19

PostSubject: Re: Stock Repair - How Difficult   May 31st 2017, 10:41 pm

no they are not rare unless its a 54 or 58cal hawken. The 58s are the rarest.
Back to top Go down
View user profile http://www.frontiermuzzleloading.com
rowdyjoe

avatar

Number of posts : 79
Age : 71
Location : Arlington, TX
Registration date : 2017-05-27

PostSubject: Re: Stock Repair - How Difficult   May 31st 2017, 10:51 pm

@FrontierGander wrote:
no they are not rare unless its a 54 or 58cal hawken. The 58s are the rarest.

Thanks FG.
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: Stock Repair - How Difficult   

Back to top Go down
 
Stock Repair - How Difficult
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Frontier Muzzleloading :: Muzzleloading Topic :: Traditional Muzzleloading-
Jump to: