Muzzleloading Forum
 
HomeGalleryFAQSearchRegisterLog in

Share | 
 

 tradition users

View previous topic View next topic Go down 
AuthorMessage
JTClark



Number of posts : 188
Age : 39
Location : Iowa
Registration date : 2013-12-23

PostSubject: tradition users   January 26th 2014, 3:22 pm

i have hardtime to get lever reinstalled after i do trigger dropout, and now need anyone who know how to get lever work and i has hard time to get it in for last a hour and half am i missing anythings ??  any help ??? 

thank
Back to top Go down
View user profile
biddler2



Male Number of posts : 609
Age : 40
Location : Central Indiana
Registration date : 2011-11-14

PostSubject: Re: tradition users   January 26th 2014, 3:56 pm

To drop the trigger assembly I remove the one screw at the back of the trigger guard. Then I can slid it out of the frame. I do not remove the slotted screw head in the frame that holds the lever assembly. To reinstall the trigger group I slide the assembly in at Ana angle then push in and forward to get the spring to seat on the hole in the lever. There is tension on the trigger assembly until you get the screw started in the frame. Don't over torque the screw because you can crack the plastic. Hope this helps

_________________
CVA APEX 45-70 Slufoot SML
Back to top Go down
View user profile
JTClark



Number of posts : 188
Age : 39
Location : Iowa
Registration date : 2013-12-23

PostSubject: Re: tradition users   January 26th 2014, 4:01 pm

is the spring that come in lever hole and a plastic where that connect on lever ? i must have missing when i open and it probably come out quickly 
do they come in with it ?
Back to top Go down
View user profile
biddler2



Male Number of posts : 609
Age : 40
Location : Central Indiana
Registration date : 2011-11-14

PostSubject: Re: tradition users   January 26th 2014, 4:06 pm

Yes the spring stays attached to the trigger group and you slide it in from the rear going upwards to get it to seat in the hole on the lever. As you push up it will start to get more difficult to hold in place and this is when you start the one screw you removed. I always forget to remove the hammer extension before removing it.

_________________
CVA APEX 45-70 Slufoot SML
Back to top Go down
View user profile
JTClark



Number of posts : 188
Age : 39
Location : Iowa
Registration date : 2013-12-23

PostSubject: Re: tradition users   January 26th 2014, 4:18 pm

it probably that come out and drop on floor or in gun cleaning box tool, wonder how small spring is to attract to lever ? i need to look for it when i open it was stiff so i slid too quick and not see spring that come out..
Back to top Go down
View user profile
biddler2



Male Number of posts : 609
Age : 40
Location : Central Indiana
Registration date : 2011-11-14

PostSubject: Re: tradition users   January 26th 2014, 4:37 pm

Pm sent

_________________
CVA APEX 45-70 Slufoot SML
Back to top Go down
View user profile
JTClark



Number of posts : 188
Age : 39
Location : Iowa
Registration date : 2013-12-23

PostSubject: Re: tradition users   January 26th 2014, 4:47 pm

sent u a email with pictures, and see if i missing a somethings on lever as springs or something that i couldn't find it
Back to top Go down
View user profile
biddler2



Male Number of posts : 609
Age : 40
Location : Central Indiana
Registration date : 2011-11-14

PostSubject: Re: tradition users   January 26th 2014, 6:01 pm

The spring is missing from the pictures you sent me. I sent you a picture of the spring and where it goes on the assembly. Here is the same picture. 
Back to top Go down
View user profile
JTClark



Number of posts : 188
Age : 39
Location : Iowa
Registration date : 2013-12-23

PostSubject: Re: tradition users   January 26th 2014, 7:16 pm

yes, hope will find it to put in before reinstall
Back to top Go down
View user profile
Sponsored content




PostSubject: Re: tradition users   

Back to top Go down
 
tradition users
View previous topic View next topic Back to top 
Page 1 of 1

Permissions in this forum:You cannot reply to topics in this forum
Frontier Muzzleloading :: Muzzleloading Topic :: Modern Muzzleloading-
Jump to: